Below is a comprehensive list of all posters with abstracts which will be presented during Materials Day Poster Sessions on October 26. Explore the details below and plan your schedule - visit, engage, and collaborate with our poster presenters.
Poster Session 1 (P1)
Thursday, October 26 - 10:30 a.m - 12:30 p.m.
TOPICS INCLUDE
- Biomaterials and Medical Devices (BMD)
- Computer Simulation and Modeling (CSM)
- Electronic Photonic Materials and Devices (EPMD)
- Materials Characterization (MC)
- Materials Processing and Manufacturing (MPM)
- Nano- and Micro-fabrication and Packaging (MNP)
Poster Session 2 (P2)
Thursday, October 26 - 1:00 p.m - 3:00 p.m.
TOPICS INCLUDE:
- Biomaterials and Medical Devices (BMD)
- Computer Simulation and Modeling (CSM)
- Electronic Photonic Materials and Devices (EPMD)
- Materials Characterization (MC)
- Materials Processing and Manufacturing (MPM)
- Nano- and Micro-fabrication and Packaging (MNP)
(expand a category below to see poster details)
01-P1:
One-Step Aptamer Selection using a Non-Fouling Porous Hydrogel
02-P1:
Macroporous hydrogel matrix-supported in situ formation of injectable ECM-like hydrogel as the carrier of growth factors and living cells
Lidya Abune, Connie Wen, Kyungsene Lee, Xuelin Wang, Dino Ravnic, Yong Wang
03-P1:
Development of a Graphene-Based Microchip for Real-Time Label-Free Monitoring of Bacterial Conjugative Interactions
Vinay Kammarchedu, Derrick Butler, Taejung Chung, Jasna Kovac, Aida Ebrahimi
04-P1:
Improved Graphitization of Lignin by Templating Using Graphene Oxide Additives
S. Ike, R. Vander Wal
05-P1:
A Novel Method of Quantitative Analysis for Lipid Membrane Interleaflet Asymmetry
R. Wang, T. Yang, P.S. Cremer
06-P1:
New Horizons in Granular Hydrogel Scaffolds for Tissue Engineering
Z. Ataie, A. Jaberi, A. Kedzierski, S. Kheirabadi, A. Sheikhi
07-P1:
Polymeric Micelles with Thermosensitive Patchy Domains as Building Blocks for an Injectable Hydrogel System
B. Han, S. Kiemle, S. Fujii, and U. Hasegawa
08-P1:
Biomacromolecular Granular Hydrogel Scaffolds for Wound Healing
Arian Jaberi, Pejman Ghelich, Mohamadmahdi Samandari, Zaman Ataie, Alireza Hassani Najafabadi, Ali Tamayol, Amir Sheikhi
View abstract
09-P1:
Phase-change peptide-Cas9 nanoemulsions for ultrasound-guided 3D gene editing
M. A. Miller, N. Vo, C. Vishy, I. Sokirniy, J. R. Pritchard, B. S. Freedman, S. H. Medina
10-P1:
Development of a Graphene-Based Microchip for Real-Time Label-Free Monitoring of Bacterial Conjugative Interactions
Vinay Kammarchedu, Derrick Butler, Taejung Chung, Jasna Kovac, Aida Ebrahimi
01-P1:
An Evaluation of Pyrite as a Component of Respirable Coal Dust
A. Eskanlou, B. J. Arnold
View abstract
02-P1:
Incorporating surface roughness into numerical modeling for predicting fatigue properties of L-PBF AlSi10Mg specimens
R. Pal, and A. Basak
03-P1:
Computational prediction of materials for the sustainable production and storage of energy
S. Oturak, S. Baksa, C. Chandler, A. Dana, S. Gelin, V. Mehta, F. M. dos Santos Vieira, T. Karimzadeh Sabet, Z. Wang, A. Song, M. S. Mohamed Mostafa Ali, Ismaila Dabo
04-P1:
Machine Learning For High Entropy Alloy Design And Discovery: Perspective, Challenges, And Future Opportunities
A. Debnath, W.F. Reinhart
05-P1:
Stephen Holoviak
Stephen Holoviak
06-P1:
Bioinspired Molecular Composites of 2D-Layered Materials and Tandem Repeat Proteins
O. Colak, A. Nicolai, M. Vural, V. Meunier, M. C. Demirel
07-P1:
Nickel Phosphide (Ni2P): An Effective Host Material for High-Performance Lithium–Sulfur Battery
R. Amaral, N.Y. Dzade
08-P1:
Mechanical Response of Spicule Nested Structure
Yuanxin Xiao
09-P1:
Techno-Economic Analysis of Hybrid Energy Systems for Increased Energetic Resiliency of Underrepresented Communities in Rural Texas
Nicolas Boyer, Fernando A. Soto Ph.D.
10-P1:
Machine Learning for Bio-Inspired Lattice Models
Manik Kumar and Christian Peco
01-P1:
Topological Mini-bands in Rashba Spin-orbit-coupled Moiré Materials and beyond.
K. Yang, Y. Liu, and C.X. Liu
02-P1:
Transport studies on 2D ferromagnetic Mn(Bi,Sb)6Te10/BN/graphite tunneling junction and 2D antiferromagnetic MnPS3/graphene QH heterostructures
C. Drew, Y. Chen, S. H. Lee, K. Watanabe, T. Taniguchi, Z. Mao, J. Zhu
03-P1:
Simultaneously harvesting the universe and the sun for radiative cooling and power
Pramit Ghosh, Xinsheng Wei, Hanze Liu, Linxiao Zhu
04-P1:
Fabrication of Inch-Scale Meta-Optical Devices with Subwavelength Antennas
M. Rahman, S. Chang, P. Terekhov, A. Islam, H. Ahn, S. Shafi, L. Zhang, X. Ni
05-P1:
Nonlinear Optical Behavior in Two-Dimensional Polar Metals
C. Ordonez, A. Jain, F. Turker, C. Dong, L. Kang, D. Werner, J. Robinson, and K. Knappenberger
06-P1:
On the Effect of Dielectric Relaxation Mechanisms on the Performance of a Multi-layered Triboelectric Nanogenerator
X. Zhao and Z. Ounaies
07-P1:
Center for Computational Mesoscale Materials Science (COMMS, DOE-CMS)
D. Fortino, A. Ross, Y. Shi, M. Zhang, U. Saha, S. Shenoy, A. Saha, M. S. Mostafa, A. Song, S. Lee, T. Chen, Q. Hong, J.M. Hu, W. Hao, A. Morozovska, E. Eliseev, I. Dabo, V. Gopalan, L.-Q. Chen
08-P1:
Flexoelectricity Induced from Interfacial Polarization in Silicon-based Barrier Layer Capacitors
T. Peters, R. Hawks, G. Lavallee, L. Collins, S. Roundy, S. Trolier-McKinstry
09-P1:
Growth & Characterization of III-V Semiconductors
M. R. McDonough, G. N. Gopakumar, and S. Law.
10-P1:
Tuning structural coloration of concave microstructures through evanescent wave absorption and variation of light collimation
K. Hirsch, N. E. Sturniolo, C. H. Meredith, M. S. Rayes, C. Rider, L. D. Zarzar
11-P1:
Metasurfaces-Enabled Creating Ultra-Bright Single Photon Sources with Metasurfaces for Quantum Information Tech
H. Ahn, D. Ahn, S. Chang, L. Zhang, Md. T. Rahman, S. Shafi and D. Lee & X. Ni
12-P1:
Dynamic Holographic Speckle Imaging for Antimicrobial Susceptibility Testing
J.Yang, K.Zhou, C.Zhou, L.Hernandez, J.Kovac, A.Ebrahimi, Z.Liu
View abstract
13-P1:
Interfacial layers to enable recyclability of solid-state lithium batteries
Yi-Chen Lan and Enrique D. Gomez
14-P1:
A 2D Cryptographic Hash Function Incorporating Homomorphic Encryption for Secure Digital Signatures
A. Wali, H. Ravichandran, S. Das
15-P1:
Ultrafast Imaging Using Spatiotemporal Encoding and Deep Learning
T. Xia, L. Zhang, C. Zhou, C. Wang, X. Ni, and Z. Liu
01-P1:
Surface Insights: Exploring Glass and Carbon Tribology
A.L. Ogrinc, Y.S. Li, S. Jang, Y.T. Lin, M.M. Link, S.H. Kim
View abstract
03-P1:
Insitu Electrochemical Impedance Spectroscopy Measurements of
Organic Coatings on Mild Steel Under Retort Conditions
S.T. Tieu, E. Sikora, H. Hopfer, and G.R. Ziegler
04-P1:
Recyclable Solid-supported Photocatalysts for Antibacterial and Polymerization Applications
B. Hunter, S. Freeburne, K. Katterle, J. L. Sacco, E. W. Gomez, C. W. Pester
05-P1:
Effect of Heat Treatment on the Ultrasonic and Mechanical Response of NiTi Shape Memory Alloys
O. J. Cook, F. K. Feni, M. A. Gonzales, R. F. Hamilton, and A. P. Argüelles
06-P1:
Research in the Reifsnyder Hickey Group: Investigating Atomic Structures
G.A. Vázquez-Lizardi; S. Adhikary; N. Dihingia; K.D. Halanayake; S.A. Iddawela; J.L. Thompson; and D. Reifsnyder Hickey
07-P1:
Zhiyu Zhang
Zhiyu Zhang
08-P1:
Parylene-based Thin-Film Luminescent Solar Concentrators
C. Li, A. Lakhtakia, O. Awadelkarim
View abstract
09-P1:
The Effect of Surface Basicity Modification on H2 Adsorption Properties
over Au/TiO2 Catalysts
T. Y. Yun and B. D. Chandler
10-P1:
Characterizing Nanoscale Thin-Film Residual Stresses For Stress Mitigation And Engineering in Next Generation X-Ray Optics
Taylor S. Wood, Hazar Şeren, Arthur Woll, Louisa Smieska, Kirt Page, Darren Pagan, Randall L. McEntaffer
11-P1:
Shape Memory Adaptive Materials Systems: Correlating Macroscale Shape Memory Response to Underlying Physical Mechanisms
M.A. Gonzales, A. Chatterjee, R.F. Hamilton
12-P1:
Surface Engineering with Polymer Brushes through Light Mediated Polymerization
Sai Dileep Kumar Seera, Christian W. Pester
13-P1:
Synthesis and Structural Characterization of Ultrathin Transition Metal Carbide/Dichalcogenide Heterostructures
D. Sanchez, A. Sredenschek, M. Terrones
14-P1:
Memories in Suspensions
Surendra Padamata, Nathan Keim
01-P1:
Additively Manufactured Inconel718-Methanol Heat Pipe: Fabrication and Low Temperature Thermal Testing.
A. Mezghani, A. R. Nassar, C. J. Dickman, E. W. Reutzel, D. E. Wolfe.
02-P1:
An NSF Materials Innovation Platform
K.A. Dressler, J.M. Redwing, N. Samarth, V.H. Crespi, J.A. Robinson, S. Law, Z. Mao, A.C.T. van Duin, J. Zhu, W. Reinhart, K.T Maxin, and R.D. Redwing
03-P1:
Grating Nanofabrication for Future Space Telescopes
F. Grisé, J. McCoy, T. Wood, R. McCurdy, D. Miles, R. McEntaffer
04-P1:
Engineering Design and Optimization Group (EDOG)- Research Overview
E. Goldberg, M. Frecker, T. Simpson, J. Butler
05-P1:
Review on Cold Sintering of (K,Na)NbO3 Ceramics
Aman Nanda, Bed Poudel, Michael Lanagan and Shashank Priya
06-P1:
Advancing PET Waste Chemical Recycling for Terephthalic Acid Recovery
Patrícia Pereira, Phillip E. Savage, Christian W. Pester
07-P1:
Processing and Microstructural Engineering of Ceramics
for Advanced Functional Applications
B.H. Watson III, M.A. Fanton, R.L. Cavalero, B.E. Weiland, B. Carr, S.D. Sheffo,
C.D. Eadie, R.D. Gamble, E.J. Oslosky, R.J. Meyer Jr.
08-P1:
Additive Manufacturing of Electronics and Ceramics
L. Lyle, J. Fox, L. Peeke, D. Erdely, R. Lavelle, I. Adu, D. Snyder, M. Krohn
10-P1:
Development of PMN-PZT Ceramic Paste for Direct Ink Writing
C.A. Fellabaum, C.D. Eadie, B.H. Watson III, M.A. Fanton, B.E. Weiland, and R.J. Meyer Jr.
11-P1:
Variable mechanical response in crystalline hybrid solids based on organic composition
Richard F. Josey III and Julie L. Fenton
View abstract
12-P1:
The Role of Surface Hydroxyls in the Entropy-Driven Adsorption and Spillover of H2 on Au/TiO2 Catalysts
A.M. Shakib, T.N. Whittaker, T.Y. Yun, K.B.S. Kumar, L.C. Rich, S. Wang, R.M. Rioux, L.C. Grabow, B.D. Chandler
13-P1:
Cold Sintering of Functional Materials
S, Momjian, J. Mena-Garcia, J. Fanghanel, J. DeChiara, K. Nakagawa, T, Nunokawa, and C.A. Randall
14-P1:
Cold Sintering Process of BaTiO3-PTFE Nanocomposites
*T. Nunokawa, K. Takashima, K. Mizuno and C. A. Randall
15-P1:
Two-Dimensional Polar Metals and Heterostructures
Cui-Zu Chang, Vincent Crespi, Susan Fullerton-Shirey, Noel (Chris) Giebink, Danielle Hickey, Shengxi Huang, Ken Knappenberger, Chao-Xing Liu, Slava Rotkin, Nitin Samarth, Mauricio Terrones, Jun Zhu, Joshua A. Robinson
16-P1:
High-Entropy Oxides: Multifunctionality Enabled through Chemical Disorder
B. Yang, S. Almishal, J. Sivak, M.K. Caucci, F. Marques dos Santos Vieira, Y. Tan, S. Ayyagari, T. Karimzadeh Sabet, Y. Son, L. Min, R. Zu, J. Barber, P. Kezer, S. Gelin, P. Lammert, J. Heron, C. Rost, V. Crespi, Z. Mao, S. Trolier-McKinstry, V. Gopalan, L. Chen, N. Alem, S. Sinnott, I. Dabo, J.P. Maria
17-P1:
Linsea Foster
Linsea Foster
18-P1:
Acoustic Field Manipulation for Location Specific Microstructure Control in Ultrasound-Assisted Additive Manufacturing
L. Mutswatiwa, L. Katch, N. Kizer, J.A. Todd, T. Sun, S. J. Clark, K. Fezzaa, J. Lum, D. Stobbe, G. T. Jones, A. P. Arguelles, and C. M. Kube
01-P1:
02-P1:
On the Maximum Self-Healing Speed of Functional Materials
Grady J. Iliff1, Lin Wang, Alexander J. Myers, Tak-Sing Wong
03-P1:
Ultra-thin 2D Semiconductors for Next Generation Devices
C. Chen, N. Trainor, S. Kumari, K. T. V. McKnight, M. E. Leger, A. R. Graves, and J. M. Redwing
05-P1:
Synthesis and Properties of 2D Semiconductors
Daniel Cintron Figueroa, Riccardo Torsi, Kyle Munson, Cindy Chen, Timothy Bowen, Li-Syuan Lu, Yu-Chuan Lin, Joshua A. Robinson.
06-P1:
Atomically-thin Half van der Waals Metals, Alloys and Compounds Stabilized via Confinement Heteroepitaxy
F. Turker, A. Vera, T. Bowen, A. Jain, K. A. Mekkanamkulam, M. W-J. Liu, R. Abraham Maniyara, Siavash Rajabpour, C. Dong, Li-Syuan Lu, Shalini Kumari, Z. Trdinich, E. Lawson, Natalie Briggs, Joshua Robinson
07-P1:
Ameliorating Interfacial Transport Resistances in Electrochemical Desalination Cells using Patterned Ion-Exchange Membranes and Ionomer Infiltrated Electrodes
Mahmudul Hasan, Bharat Shrimant, Christopher G. Arges
01-P2:
Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D)
Applied Research Lab / College of Engineering / College of Earth and Mineral Sciences joint Research Center
02-P2:
Abstract
View abstract
03-P2:
All Aqueous Emulsions as Model Systems for Artificial Cells
A.A.D.T. Abeysinghe, C.D. Keating
04-P2:
Emergent Self-Organizations of Dense Active Droplet Systems
Yutong Liu, R. Kailash, Pepijn G. Moerman, Aditya S. Khair, and Lauren D. Zarzar
05-P2:
High-throughput microgel biofabrication via air-assisted co-axial jetting for cell encapsulation, 3D bioprinting, and scaffolding applications
Vaibhav Pal, Yogendra Pratap Singh, Deepak Gupta, Mecit Altan Alioglu, Momoka Nagamine, Myoung Hwan Kim, Ibrahim T. Ozbolat
06-P2:
Tailoring Bio-based Polyester UV-curable Resins with Tunable Mechanical Properties suitable for SLA 3D Printing Applications
S.M.Q. Bokhari, J.M. Catchmark, S. Chmely
07-P2:
Focused Ultrasound Mediated Release of Bone Morphogenetic Protein 2 for Bone Regeneration
Tyus J. Yeingst, Ferdousi S. Rawnaque, Angel M. Helton, Lindsay P. Stone, Julien H. Arrizabalaga, Julianna C. Simon, and Daniel J. Hayes
08-P2:
Nanoscale Hafnium for Radiation Therapy and ‘Color’ CT Imaging
N.Gunaseelan, D. Skrodzki, P.Moitra, and D.Pan
09-P2:
High-Resolution Reconstruction of Human Lung Tissue Structure via Electron Cryo-Tomography
J.L. Thompson, K. M. Hwan, T.E. Clark, D. Banerjee, M.T. Swulius, I.T. Ozbolat, D. Reifsnyder Hickey
10-P2:
DNA-origami derived nanoplatelet bioactive surface for detection of sexually transmitted infections (STIs)
*K. Dighe, P. Moitra, and D. Pan
01-P2:
Dissipation effects on the electrical conductivity on solids with anharmonicities
C.I. Vallejos, and J.O. Sofo
02-P2:
Nanomedical Formulations in the Adair Labs
J.H. Adair, B.M. Adair, B. Rosoff-Verbit, A. Shearson, K. Yue, E. Chopde, M. Molinaro, A. Ascani-Orsini, N. Graybill, G. Gines, R. Alalwan, and A. Weiss
View abstract
03-P2:
Harnessing the Power of Molecular Dynamics: A Nanoscale View of
Organic Photovoltaic Materials
C. L. Mahajan, S. T. Milner
04-P2:
Programming the next generation of living reconfigurable structures
A. Palacio-Betancur1, C.S. Singh, A. Rácz, M.A. Maghsoudlou, V. Slesarenko, and M. Gutierrez Soto
05-P2:
Atomistic Simulations to Predict Semiconducting Polymer Blend Morphology Effect on Charge Transport
Puja Agarwala, Enrique D. Gomez, Scott T. Milner
06-P2:
First-Principles Density Functional Theory Investigation of Oxygen and Water Adsorption on the (010), (100), and (111) Surfaces of BaZrS3
H. I. Eya and N. Y. Dzade
07-P2:
Desorption Characteristics of Selenium Thin Films: A ReaxFF Molecular Dynamics Study
M. Wang, N. Nayir, D.S.H. Liu, M. Hilse, R. Engel-Herbert, A.C.T. van Duin
08-P2:
Causes and Applications of Enzyme Chemotaxis
N. S. Mandal, Aditya Sapre, R.D. Astumian, A. Sen
09-P2:
Ultrafast Imaging Using Spatiotemporal Encoding and Deep Learning
T. Xia, L. Zhang, C. Zhou, C. Wang, X. Ni, and Z. Liu
01-P2:
Metal Halide Perovskites for Photovoltaic Applications
Arezo. Mahdavi Varposhti, Ivy M. Asuo, Joshua A. Robinson, Nutifafa Y. Doumon
02-P2:
Crossover from Ising- to Rashba-Type Superconductivity in Epitaxial Bi2Se3/Monolayer NbSe2 Heterostructures
Hemian Yi, Lun-Hui Hu, Yuanxi Wang, Run Xiao, Jiaqi Cai, Danielle Reifsnyder Hickey, Chengye Dong, Yi-Fan Zhao, Ling-Jie Zhou, Ruoxi Zhang, Anthony R. Richardella, Nasim Alem, Joshua A. Robinson, Moses H. W. Chan, Xiaodong Xu, Nitin Samarth, Chao-Xing Liu, Cui-Zu Chang
03-P2:
Nonlinear Optics Based on Dielectric Metasurfaces
L. Kang and D. H. Werner
04-P2:
Fully Stretched to Collapsed: Bottlebrush Polymer Grafted Nanoparticle Materials
J.N. Sevening, M.J.A. Hore, M.T. Swulius, H. Koerner, and R.J. Hickey
05-P2:
Non-exhibition of the Bragg Phenomenon from Temporally Periodic Physical Vapor Deposition on Rough Surfaces.
R. A. Fiallo, C. Li, M. W. Horn, and A. Lakhtakia
06-P2:
Electrochemical Steady State Isotopic Transient Kinetic Analysis (e-SSITKA): A New Technique for the Investigation of Electrocatalytic Materials
Abigail R. Circelli, Ezra L. Clark
07-P2:
PEALD ZnO Thin Film Transistors for Memory, Sensing, and Biomedical Devices
V. Vasquez, Q. Tran, H. Liang, X. Zheng, T. Jeong, T. N. Jackson
08-P2:
Selective Area Epitaxial Growth of Magnesium Diboride on SiC using Epitaxial Graphene
P.A. Rondomanski, C. Dong, Q. Li, and J.M. Redwing
09-P2:
The High Field MRI Facility at Penn State
T. Neuberger and S. Gullette
10-P2:
An Overview of Capabilities and R&D at the Penn State Applied Research Laboratory’s Electronic Materials and Devices Department (EMDD)
Electronic, Piezoelectric and Optical Materials Synthesis, Characterization, Device Fabrication and 3D Printed RF Electronics
David Snyder, Matthew Krohn, Josh Fox, Robert Lavelle, David Rearick, Luke Lyle, Daniel Erdely, Randy Cavalero, Joseph Brown, Scott Pistner, William Everson, Isaiah Adu, Andrew Arbanas, Nicholas Keggan, Brandon Fischer, Bradley Carr and Shawn Watkins
11-P2:
Broadband Nonreciprocal Emission and Absorption Using Epsilon-near-zero Metamaterial
Zhenong Zhang and Linxiao Zhu
12-P2:
Advancements in Large-Scale, High-Efficiency Flat Optical Devices
S. Chang, L. Zhang, M. Rahman, L. Zhao, A. Islam and X. Ni
13-P2:
Synthesis of 2D Materials by Molecular Beam Epitaxy
R. Trice, M. Yu, M. Hilse, S. Law
14-P2:
Rational Design of Intermetallic Electrocatalysts for CO Reduction via Electronic Structure Engineering
Majd M.Matalkeh, Ezra L. Clark
15-P2:
Smart snapshot full-stokes spectra-polarimetric camera enabled by optical metasurfaces and deep learning
L. Zhang, C. Zhou, Y. Ding, H. J. Ahn, S. Chang, Y. Duan, B. Liu, X. Chen, M. T. Rahman, Z. Liu and X. Ni
16-P2:
Prediction of Frontier Orbitals and Excitons in Conjugated Molecules
for Organic Photovoltaics Using Computational Models
Vishal Jindal, Michael J. Janik, Scott T. Milner
01-P2:
Probing Memory Formation in a Two-dimensional Amorphous Solid
Z. Wang, N. C. Keim
02-P2:
Exploiting 4D-STEM for In-Situ TEM Strain Mapping during Metal Corrosion.
Yongwen Sun, Ying Han, Dan Zhou, Yang Yang
04-P2:
In-Depth Analysis of Common Antioxidant Decomposition: A Comparative Study Using Two-Dimensional and One-Dimensional Gas Chromatography
Rowfi Khan, Barbara Alejandra Perez, Hilal Ezgi Toraman
05-P2:
Quantitative 3D Melt Pool Characterization using Focused Ultrasound
L. Katch, N.J. Kizer, L. Mutswatiwa, T. Sun, S.J. Clark, J.S. Lum, D.M. Stobbe, A.P. Argüelles and C.M. Kube
06-P2:
Ultrasonic Characterization of Damage in Multilayer Ceramic Capacitors
H.N. Jones, A.P. Argüelles, S. Trolier-McKinstry,
07-P2:
Temperature Coefficient Reduction in Layered Dielectric Resonators for MRI Applications
F. Krauch, M. Lanagan, T. Neuberger, Q. Yang, S. Rupprecht, H. Wiesner, X. Zhu and W. Chen
View abstract
08-P2:
Magnetic and Rheological Properties of Shape Memory Epoxy-Iron Oxide Composite Inks
M.H. Zamani and Z. Ounaies
09-P2:
Versatile Surface Characterizations of Sum Frequency Generation(SFG) Spectroscopy for Polymers
JC Lee, JS Choi, YW Guo, JH Ryu, SH Kim
10-P2:
Is Chemical Pre-Treatment of LDPE Necessary to Accelerate Fungal Degradation of Plastic?
Jacob Simmons, Marina Eshbaugh, Samantha Semler, Gamini Mendis, Luciana Aronne, Josephine Wee
11-P2:
A Machine Learning Attack Resilient True Random Number Generator Based on Stochastic Programming of Atomically Thin Transistors
A. Wali, H. Ravichandran & S. Das
12-P2:
Multiscale Structural Characterization of Epidermal Cell Wals during Mechanical Stretch
J. Yu, J. T. Del Mundo, E. W. Gomez, E. D. Gomez, and D. J. Cosgrove
13-P2:
Use Cross Laminated Timber for Construction of Tornado Resistant Homes
Wei Tong and Ali Memari
14-P2:
Dielectric Response of Polymers at High Electric Field
Md Marshfiqur Rahman
01-P2:
Optimizing Infrastructure Material Recycling through Adaptive Reuse for Affordable Housing
Daniele Paulino, Heather Ligler, Rebecca Napolitano
02-P2:
Unitized Regenerative Fuel Cells with High-Temperature Proton Exchange Membranes
Panagiota Argyro Doika, Christopher G. Arges
03-P2:
Understanding rare earth point defects in MoS2
H. Kang and L. Muechler
04-P2:
Real-Time Volumetric Micron-Scale Monitoring for Polymer 3D Printing using Ultrasound
Nathan J. Kizer and Christopher M. Kube
05-P2:
Towards High-sensitivity Transparent Piezoelectric-Ultrasound Transducers for Biomedical Applications
S. Khandare, A. Amin, S. Kataria, A. Qushaysh, H. Chen, S. Mirg, M. Osman, S.R. Kothapalli
06-P2:
Atomic Layer Deposition of Interfacial Coatings for All-Solid-State Lithium Metal Batteries
Silver, A., Wang, D.
07-P2:
Sustainable Carbon Materials for Enhanced Composites and Energy Storage
A. Gharpure, and R. Vander Wal
08-P2:
Advanced Additive Manufacturing of Metallic Materials
T.A. Palmer
09-P2:
Jacklyn Griffis
Jacklyn Griffis
10-P2:
Mitigation of Porosity in Laser Powder Bed Fusion Additive Manufacturing
C. M. Cummings, D. J. Corbin, R. Overdorff, E. W. Reutzel, A. R. Nassar
11-P2:
Stable All-Solid-State Sodium-Sulfur Batteries Enabled by Sodium-Antimony Alloy Anode and Confined Sulfur CathodeRichard F. Li-Ji Jhang, Daiwei Wang, Alexander Silver, Xiaolin Li, David Reed, Donghai Wang
View abstract
12-P2:
Porous, Biomimetic Hydrogels Demonstrating Structurally-Dependent Mechanical Properties
E.C. Lloyd, R.J. Hickey
13-P2:
Topological Classification of Chemical Reactions: A New Tool to Understand and Manipulate Chemical Reactivity
Mirzanejad, A., Daggett, C., Xie, Z. and, L. Muechler
14-P2:
Post-Processing Heat Treatment of Additive Manufactured NiTi Alloys with Ti-Rich Composition
F.K. Feni, M. A. Gonzales, and R.F. Hamilton
15-P2:
Characterization and Processing Improvements for Fabricating β-Ga2O3 Substrates for Next-Generation Power Electronics
R.M. Lavelle, W.J. Everson, D.J. Erdely, S. Pistner, L.A. Lyle, and D.W. Snyder
16-P2:
Quantifying the Affinity Difference between Lithium and Close Identity Ions using ETS-10 Titanosilicate and Supported with Density Functional Theory
W. K. Guo, X. Zhang, M. J. Janik, G. Noh
17-P2:
Using Ultrasound to Improve Assessment of the Cold Sintering Process in Support of Eco-Friendly Ceramics Manufacturing
C.S. Wheatley Jr., C.A. Randall, and A.P. Argüelles
18-P2:
Pyrolysis of Ethylene Vinyl Alcohol (EvOH)
A. P. Buddha, B. Dr. H.E. Toraman
01-P2:
High-Entropy Oxides: Multifunctionality Enabled through Chemical Disorder
B. Yang, S. Almishal, J. Sivak, M.K. Caucci, F. Marques dos Santos Vieira, Y. Tan, S. Ayyagari, T. Karimzadeh Sabet, Y. Son, L. Min, R. Zu, J. Barber, P. Kezer, S. Gelin, P. Lammert, J. Heron, C. Rost, V. Crespi, Z. Mao, S. Trolier-McKinstry, V. Gopalan, L. Chen, N. Alem, S. Sinnott, I. Dabo, J.P. Maria
02-P2:
Update on the Nanofabrication facility at the Materials Research Institute
Chad Eichfeld, Guy Lavallee, Bill Drawl, Andrew Fitzgerald, Bangzhi Liu, Bill Mahoney, Kathleen Gehoski, Ted Gehoski, Michael Labella, Wanlin Zhu, Shane Miller, Jaime Reish and Daniel Lopez.
03-P2:
Collective Behavior of Free Enzymes and Enzyme-Attached Particles
Tseng Y., Goonetilleke C., Mandal N., and Sen A.
04-P2:
Dimensionality Reduction of Nanoparticle Reinforced Ice Microstructures
Barai, Shishir
05-P2:
The Effect of the Mobility of Surface-Grafted Polymer on the Interaction between Nanoparticles and Liver Sinusoidal Endothelial Cells
A. Ben Mabrouk, C. George, H. Nakajima, B. Han, U. Hasegawa
07-P2:
Are Lab-Made Research Grade Microplastics Analogous to Plastic Consumer Product Degradation Materials?
R.C. Bak, R.P. Bell, R.J. Donahue, M.A. Persch, G.P. Mendis, X. Zhang
