Advanced Transducer Fabrication Workshop

Advanced Transducer Fabrication Workshop

THURSDAY, May 10, 2018
1:30 p.m. - 5:00 p.m.


1:30 p.m. Welcome & Introductions
These presentations will focus on the resources and capabilities available in the Millennium Science Complex and how they can facilitate and support next generation prototyping.
1:40 p.m. Bulk Piezoelectrics
Low Temperature Co-fired Ceramics Lab & Cold Sintering
Prof. Clive Randall, Director, Materials Research Institute
2:10 p.m. Thin Piezoelectric Films
Sol-gel processing, coating, patterning, and etching
Prof. Susan Trolier-McKinstry, Director, The Nanofabrication Laboratory
2:40 p.m. Engaging with PSU
IP policy, industrial use of facilities, state and federal resources to provide financial assistance
David Fecko, Ph.D., Industry Relations Coordinator
3:00 p.m. Fab Success Stories Panel
Relevant industry engagement examples and testimonials
Moderated by Guy Lavallee, External Liaison, Etch Technical Lead
3:45 p.m. Q & A
4:00 p.m. - 5:00 p.m. Facility Tours
Nanofab window tour
LTCC - Low Temperature Co-fired Ceramics Lab
Transducer Characterization

* subject to change

Register Today!

Parking and Location

The workshop will take place in room N308 of the Millennium Science Complex (MSC) beginning at 1:30pm. 

There are 2 parking decks near the MSC where you can pay by the hour ($1/hour) to park, East Parking Deck (EAD) and the HUB Parking Deck (HPD).  You can also park in Eisenhower Parking Deck (EPD), but will need to purchase an all-day parking tag ($8) at the parking office on the ground floor of the deck.  Buildings and parking decks are searchable on this web page: