materials day 2023 october 26-27Below is a comprehensive list of all posters with abstracts which will be presented during Materials Day Poster Sessions on October 26.  Explore the details below and plan your schedule - visit, engage, and collaborate with our poster presenters.

Poster Identification

Poster Session 1 (P1)

Thursday, October 26 - 10:30 a.m - 12:30 p.m.

TOPICS INCLUDE

  • Biomaterials and Medical Devices (BMD)
  • Computer Simulation and Modeling (CSM)
  • Electronic Photonic Materials and Devices (EPMD)
  • Materials Characterization (MC)
  • Materials Processing and Manufacturing (MPM)
  • Nano- and Micro-fabrication and Packaging (MNP)

Poster Session 2 (P2)

Thursday, October 26 - 1:00 p.m - 3:00 p.m.

TOPICS INCLUDE:

  • Biomaterials and Medical Devices (BMD)
  • Computer Simulation and Modeling (CSM)
  • Electronic Photonic Materials and Devices (EPMD)
  • Materials Characterization (MC)
  • Materials Processing and Manufacturing (MPM)
  • Nano- and Micro-fabrication and Packaging (MNP)

(expand a category below to see poster details)

01-P1:

One-Step Aptamer Selection using a Non-Fouling Porous Hydrogel

View abstract

02-P1:

Macroporous hydrogel matrix-supported in situ formation of injectable ECM-like hydrogel as the carrier of growth factors and living cells

Lidya Abune, Connie Wen, Kyungsene Lee, Xuelin Wang, Dino Ravnic, Yong Wang

View abstract

03-P1:
Development of a Graphene-Based Microchip for Real-Time Label-Free Monitoring of Bacterial Conjugative Interactions

Vinay Kammarchedu, Derrick Butler, Taejung Chung, Jasna Kovac, Aida Ebrahimi

View abstract

04-P1:
Improved Graphitization of Lignin by Templating Using Graphene Oxide Additives

S. Ike, R. Vander Wal

View abstract

05-P1:
A Novel Method of Quantitative Analysis for Lipid Membrane Interleaflet Asymmetry

R. Wang, T. Yang, P.S. Cremer 

View abstract

06-P1:
New Horizons in Granular Hydrogel Scaffolds for Tissue Engineering

Z. Ataie, A. Jaberi, A. Kedzierski, S. Kheirabadi, A. Sheikhi

View abstract

07-P1:
Polymeric Micelles with Thermosensitive Patchy Domains as Building Blocks for an Injectable Hydrogel System

B. Han, S. Kiemle, S. Fujii, and U. Hasegawa

View abstract

08-P1:
Biomacromolecular Granular Hydrogel Scaffolds for Wound Healing
Arian Jaberi, Pejman Ghelich, Mohamadmahdi Samandari, Zaman Ataie, Alireza Hassani Najafabadi, Ali Tamayol, Amir Sheikhi
View abstract

09-P1:
Phase-change peptide-Cas9 nanoemulsions for ultrasound-guided 3D gene editing

M. A. Miller, N. Vo, C. Vishy, I. Sokirniy, J. R. Pritchard, B. S. Freedman, S. H. Medina

View abstract

10-P1:
Development of a Graphene-Based Microchip for Real-Time Label-Free Monitoring of Bacterial Conjugative Interactions
Vinay Kammarchedu, Derrick Butler, Taejung Chung, Jasna Kovac, Aida Ebrahimi

View abstract

01-P1:
An Evaluation of Pyrite as a Component of Respirable Coal Dust

A. Eskanlou, B. J. Arnold
View abstract

02-P1:
Incorporating surface roughness into numerical modeling for predicting fatigue properties of L-PBF AlSi10Mg specimens

R. Pal, and A. Basak

View abstract

03-P1:
Computational prediction of materials for the sustainable production and storage of energy
S. Oturak, S. Baksa, C. Chandler, A. Dana, S. Gelin, V. Mehta, F. M. dos Santos Vieira, T. Karimzadeh Sabet, Z. Wang, A. Song, M. S. Mohamed Mostafa Ali, Ismaila Dabo

View abstract

04-P1:
Machine Learning For High Entropy Alloy Design And Discovery: Perspective, Challenges, And Future Opportunities
A. Debnath, W.F. Reinhart

View abstract

05-P1:

Stephen Holoviak

Stephen Holoviak

View abstract

06-P1:
Bioinspired Molecular Composites of 2D-Layered Materials and Tandem Repeat Proteins

O. Colak, A. Nicolai, M. Vural, V. Meunier, M. C. Demirel

View abstract

07-P1:
Nickel Phosphide (Ni2P): An Effective Host Material for High-Performance Lithium–Sulfur Battery

R. Amaral, N.Y. Dzade

View abstract

08-P1:
Mechanical Response of Spicule Nested Structure

Yuanxin Xiao

View abstract

09-P1:
Techno-Economic Analysis of Hybrid Energy Systems for Increased Energetic Resiliency of Underrepresented Communities in Rural Texas
Nicolas Boyer, Fernando A. Soto Ph.D.

View abstract

10-P1:
Machine Learning for Bio-Inspired Lattice Models 

Manik Kumar and Christian Peco

View abstract

01-P1:
Topological Mini-bands in Rashba Spin-orbit-coupled Moiré Materials and beyond.
K. Yang, Y. Liu, and C.X. Liu

View abstract

02-P1:
Transport studies on 2D ferromagnetic Mn(Bi,Sb)6Te10/BN/graphite tunneling junction and 2D antiferromagnetic MnPS3/graphene QH heterostructures
C. Drew, Y. Chen, S. H. Lee, K. Watanabe, T. Taniguchi, Z. Mao, J. Zhu

View abstract

03-P1:
Simultaneously harvesting the universe and the sun for radiative cooling and power

Pramit Ghosh, Xinsheng Wei, Hanze Liu, Linxiao Zhu

View abstract

04-P1:
Fabrication of Inch-Scale Meta-Optical Devices with Subwavelength Antennas

M. Rahman, S. Chang, P. Terekhov, A. Islam, H. Ahn, S. Shafi, L. Zhang, X. Ni

View abstract

05-P1:
Nonlinear Optical Behavior in Two-Dimensional Polar Metals

C. Ordonez, A. Jain, F. Turker, C. Dong, L. Kang, D. Werner, J. Robinson, and K. Knappenberger

View abstract

06-P1:
On the Effect of Dielectric Relaxation Mechanisms on the Performance of a Multi-layered Triboelectric Nanogenerator

X. Zhao and Z. Ounaies

View abstract

07-P1:
Center for Computational Mesoscale Materials Science (COMMS, DOE-CMS)

D. Fortino, A. Ross, Y. Shi, M. Zhang, U. Saha, S. Shenoy, A. Saha, M. S. Mostafa, A. Song, S. Lee, T. Chen, Q. Hong, J.M. Hu, W. Hao, A. Morozovska, E. Eliseev, I. Dabo, V. Gopalan, L.-Q. Chen

View abstract

08-P1:
Flexoelectricity Induced from Interfacial Polarization in Silicon-based Barrier Layer Capacitors

T. Peters, R. Hawks, G. Lavallee, L. Collins, S. Roundy, S. Trolier-McKinstry

View abstract

09-P1:
Growth & Characterization of III-V Semiconductors
M. R. McDonough, G. N. Gopakumar, and S. Law.

View abstract

10-P1:
Tuning structural coloration of concave microstructures through evanescent wave absorption and variation of light collimation
K. Hirsch, N. E. Sturniolo, C. H. Meredith, M. S. Rayes, C. Rider, L. D. Zarzar

View abstract

11-P1:
Metasurfaces-Enabled Creating Ultra-Bright Single Photon Sources with Metasurfaces for Quantum Information Tech

H. Ahn, D. Ahn, S. Chang, L. Zhang, Md. T. Rahman, S. Shafi and D. Lee & X. Ni

View abstract

12-P1:
Dynamic Holographic Speckle Imaging for Antimicrobial Susceptibility Testing

J.Yang, K.Zhou, C.Zhou, L.Hernandez, J.Kovac, A.Ebrahimi, Z.Liu
View abstract

13-P1:
Interfacial layers to enable recyclability of solid-state lithium batteries
Yi-Chen Lan and Enrique D. Gomez

View abstract

14-P1:
A 2D Cryptographic Hash Function Incorporating Homomorphic Encryption for Secure Digital Signatures

A. Wali, H. Ravichandran, S. Das

View abstract

15-P1:
Ultrafast Imaging Using Spatiotemporal Encoding and Deep Learning

T. Xia, L. Zhang, C. Zhou, C. Wang, X. Ni, and Z. Liu

View abstract

01-P1:
Surface Insights: Exploring Glass and Carbon Tribology

A.L. Ogrinc, Y.S. Li, S. Jang, Y.T. Lin, M.M. Link, S.H. Kim
View abstract

03-P1:
Insitu Electrochemical Impedance Spectroscopy Measurements of
Organic Coatings on Mild Steel Under Retort Conditions

S.T. Tieu, E. Sikora, H. Hopfer, and G.R. Ziegler

View abstract

04-P1:
Recyclable Solid-supported Photocatalysts for Antibacterial and Polymerization Applications

B. Hunter, S. Freeburne, K. Katterle, J. L. Sacco, E. W. Gomez, C. W. Pester

View abstract

05-P1:
Effect of Heat Treatment on the Ultrasonic and Mechanical Response of NiTi Shape Memory Alloys

O. J. Cook, F. K. Feni, M. A. Gonzales, R. F. Hamilton, and A. P. Argüelles

View abstract

06-P1:
Research in the Reifsnyder Hickey Group: Investigating Atomic Structures

G.A. Vázquez-Lizardi; S. Adhikary; N. Dihingia; K.D. Halanayake; S.A. Iddawela; J.L. Thompson; and D. Reifsnyder Hickey

View abstract

07-P1:

Zhiyu Zhang

Zhiyu Zhang

View abstract

08-P1:
Parylene-based Thin-Film Luminescent Solar Concentrators
C. Li, A. Lakhtakia, O. Awadelkarim

View abstract

09-P1:
The Effect of Surface Basicity Modification on H2 Adsorption Properties
over Au/TiO2 Catalysts

T. Y. Yun and B. D. Chandler

View abstract

10-P1:
Characterizing Nanoscale Thin-Film Residual Stresses For Stress Mitigation And Engineering in Next Generation X-Ray Optics

Taylor S. Wood, Hazar Şeren, Arthur Woll, Louisa Smieska, Kirt Page, Darren Pagan, Randall L. McEntaffer

View abstract

11-P1:
Shape Memory Adaptive Materials Systems: Correlating Macroscale Shape Memory Response to Underlying Physical Mechanisms

M.A. Gonzales, A. Chatterjee, R.F. Hamilton

View abstract

12-P1:
Surface Engineering with Polymer Brushes through Light Mediated Polymerization

Sai Dileep Kumar Seera, Christian W. Pester

View abstract

13-P1:
Synthesis and Structural Characterization of Ultrathin Transition Metal Carbide/Dichalcogenide Heterostructures

D. Sanchez, A. Sredenschek, M. Terrones

View abstract

14-P1:
Memories in Suspensions

Surendra Padamata, Nathan Keim

View abstract

01-P1:
Additively Manufactured Inconel718-Methanol Heat Pipe: Fabrication and Low Temperature Thermal Testing.

A. Mezghani, A. R. Nassar, C. J. Dickman, E. W. Reutzel, D. E. Wolfe.

View abstract

02-P1:
An NSF Materials Innovation Platform

K.A. Dressler, J.M. Redwing, N. Samarth, V.H. Crespi, J.A. Robinson, S. Law, Z. Mao, A.C.T. van Duin, J. Zhu, W. Reinhart, K.T Maxin, and R.D. Redwing

View abstract

03-P1:
Grating Nanofabrication for Future Space Telescopes

F. Grisé, J. McCoy, T. Wood, R. McCurdy, D. Miles, R. McEntaffer

View abstract

04-P1:
Engineering Design and Optimization Group (EDOG)- Research Overview

E. Goldberg, M. Frecker, T. Simpson, J. Butler

View abstract

05-P1:
Review on Cold Sintering of (K,Na)NbO3 Ceramics

Aman Nanda, Bed Poudel, Michael Lanagan and Shashank Priya

View abstract

06-P1:
Advancing PET Waste Chemical Recycling for Terephthalic Acid Recovery

Patrícia Pereira, Phillip E. Savage, Christian W. Pester

View abstract

07-P1:
Processing and Microstructural Engineering of Ceramics
for Advanced Functional Applications

B.H. Watson III, M.A. Fanton, R.L. Cavalero, B.E. Weiland, B. Carr, S.D. Sheffo,
C.D. Eadie, R.D. Gamble, E.J. Oslosky, R.J. Meyer Jr.

View abstract

08-P1:
Additive Manufacturing of Electronics and Ceramics

L. Lyle, J. Fox, L. Peeke, D. Erdely, R. Lavelle, I. Adu, D. Snyder, M. Krohn

View abstract

10-P1:
Development of PMN-PZT Ceramic Paste for Direct Ink Writing

C.A. Fellabaum, C.D. Eadie, B.H. Watson III, M.A. Fanton, B.E. Weiland, and R.J. Meyer Jr.

View abstract

11-P1:
Variable mechanical response in crystalline hybrid solids based on organic composition
Richard F. Josey III and Julie L. Fenton

View abstract

12-P1:
The Role of Surface Hydroxyls in the Entropy-Driven Adsorption and Spillover of H2 on Au/TiO2 Catalysts

A.M. Shakib, T.N. Whittaker, T.Y. Yun, K.B.S. Kumar, L.C. Rich, S. Wang, R.M. Rioux, L.C. Grabow, B.D. Chandler

View abstract

13-P1:
Cold Sintering of Functional Materials
S, Momjian, J. Mena-Garcia, J. Fanghanel, J. DeChiara, K. Nakagawa, T, Nunokawa, and C.A. Randall

View abstract

14-P1:
Cold Sintering Process of BaTiO3-PTFE Nanocomposites

*T. Nunokawa, K. Takashima, K. Mizuno and C. A. Randall

View abstract

15-P1:
Two-Dimensional Polar Metals and Heterostructures

Cui-Zu Chang, Vincent Crespi, Susan Fullerton-Shirey, Noel (Chris) Giebink, Danielle Hickey, Shengxi Huang, Ken Knappenberger, Chao-Xing Liu, Slava Rotkin, Nitin Samarth, Mauricio Terrones, Jun Zhu, Joshua A. Robinson

View abstract

16-P1:
High-Entropy Oxides: Multifunctionality Enabled through Chemical Disorder

B. Yang, S. Almishal, J. Sivak, M.K. Caucci, F. Marques dos Santos Vieira, Y. Tan, S. Ayyagari, T. Karimzadeh Sabet, Y. Son, L. Min, R. Zu, J. Barber, P. Kezer, S. Gelin, P. Lammert, J. Heron, C. Rost, V. Crespi, Z. Mao, S. Trolier-McKinstry, V. Gopalan, L. Chen, N. Alem, S. Sinnott, I. Dabo, J.P. Maria

View abstract

17-P1:

Linsea Foster
Linsea Foster

View abstract

18-P1:
Acoustic Field Manipulation for Location Specific Microstructure Control in Ultrasound-Assisted Additive Manufacturing
L. Mutswatiwa, L. Katch, N. Kizer, J.A. Todd, T. Sun, S. J. Clark, K. Fezzaa, J. Lum, D. Stobbe, G. T. Jones, A. P. Arguelles, and C. M. Kube

View abstract

01-P1:

View abstract

02-P1:

On the Maximum Self-Healing Speed of Functional Materials

Grady J. Iliff1, Lin Wang, Alexander J. Myers, Tak-Sing Wong

View abstract

03-P1:

Ultra-thin 2D Semiconductors for Next Generation Devices

C. Chen, N. Trainor, S. Kumari, K. T. V. McKnight, M. E. Leger, A. R. Graves, and J. M. Redwing

View abstract

05-P1:

Synthesis and Properties of 2D Semiconductors

Daniel Cintron Figueroa, Riccardo Torsi, Kyle Munson, Cindy Chen, Timothy Bowen, Li-Syuan Lu, Yu-Chuan Lin, Joshua A. Robinson.

View abstract

06-P1:

Atomically-thin Half van der Waals Metals, Alloys and Compounds Stabilized via Confinement Heteroepitaxy

F. Turker, A. Vera, T. Bowen, A. Jain, K. A. Mekkanamkulam, M. W-J. Liu, R. Abraham Maniyara, Siavash Rajabpour, C. Dong, Li-Syuan Lu, Shalini Kumari, Z. Trdinich, E. Lawson, Natalie Briggs, Joshua Robinson

View abstract

07-P1:

Ameliorating Interfacial Transport Resistances in Electrochemical Desalination Cells using Patterned Ion-Exchange Membranes and Ionomer Infiltrated Electrodes

Mahmudul Hasan, Bharat Shrimant, Christopher G. Arges

View abstract

01-P2:
Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D)

Applied Research Lab / College of Engineering / College of Earth and Mineral Sciences joint Research Center

View abstract

02-P2:
Abstract
View abstract

03-P2:
All Aqueous Emulsions as Model Systems for Artificial Cells

A.A.D.T. Abeysinghe, C.D. Keating

View abstract

04-P2:
Emergent Self-Organizations of Dense Active Droplet Systems

Yutong Liu, R. Kailash, Pepijn G. Moerman, Aditya S. Khair, and Lauren D. Zarzar

View abstract

05-P2:
High-throughput microgel biofabrication via air-assisted co-axial jetting for cell encapsulation, 3D bioprinting, and scaffolding applications

Vaibhav Pal, Yogendra Pratap Singh, Deepak Gupta, Mecit Altan Alioglu, Momoka Nagamine, Myoung Hwan Kim, Ibrahim T. Ozbolat

View abstract

06-P2:
Tailoring Bio-based Polyester UV-curable Resins with Tunable Mechanical Properties suitable for SLA 3D Printing Applications

S.M.Q. Bokhari, J.M. Catchmark, S. Chmely

View abstract

07-P2:
Focused Ultrasound Mediated Release of Bone Morphogenetic Protein 2 for Bone Regeneration
Tyus J. Yeingst, Ferdousi S. Rawnaque, Angel M. Helton, Lindsay P. Stone, Julien H. Arrizabalaga, Julianna C. Simon, and Daniel J. Hayes

View abstract

08-P2:
Nanoscale Hafnium for Radiation Therapy and ‘Color’ CT Imaging

N.Gunaseelan, D. Skrodzki, P.Moitra, and D.Pan

View abstract

09-P2:
High-Resolution Reconstruction of Human Lung Tissue Structure via Electron Cryo-Tomography
J.L. Thompson, K. M. Hwan, T.E. Clark, D. Banerjee, M.T. Swulius, I.T. Ozbolat, D. Reifsnyder Hickey

View abstract

10-P2:
DNA-origami derived nanoplatelet bioactive surface for detection of sexually transmitted infections (STIs)

*K. Dighe, P. Moitra, and D. Pan

View abstract

01-P2:
Dissipation effects on the electrical conductivity on solids with anharmonicities
C.I. Vallejos, and J.O. Sofo

View abstract

02-P2:
Nanomedical Formulations in the Adair Labs
J.H. Adair, B.M. Adair, B. Rosoff-Verbit, A. Shearson, K. Yue, E. Chopde, M. Molinaro, A. Ascani-Orsini, N. Graybill, G. Gines, R. Alalwan, and A. Weiss

View abstract

03-P2:
Harnessing the Power of Molecular Dynamics: A Nanoscale View of
Organic Photovoltaic Materials

C. L. Mahajan, S. T. Milner

View abstract

04-P2:
Programming the next generation of living reconfigurable structures

A. Palacio-Betancur1, C.S. Singh, A. Rácz, M.A. Maghsoudlou, V. Slesarenko, and M. Gutierrez Soto

View abstract

05-P2:
Atomistic Simulations to Predict Semiconducting Polymer Blend Morphology Effect on Charge Transport
Puja Agarwala, Enrique D. Gomez, Scott T. Milner

View abstract

06-P2:
First-Principles Density Functional Theory Investigation of Oxygen and Water Adsorption on the (010), (100), and (111) Surfaces of BaZrS3

H. I. Eya and N. Y. Dzade

View abstract

07-P2:
Desorption Characteristics of Selenium Thin Films: A ReaxFF Molecular Dynamics Study

M. Wang, N. Nayir, D.S.H. Liu, M. Hilse, R. Engel-Herbert, A.C.T. van Duin

View abstract

08-P2:
Causes and Applications of Enzyme Chemotaxis

N. S. Mandal, Aditya Sapre, R.D. Astumian, A. Sen

View abstract

09-P2:
Ultrafast Imaging Using Spatiotemporal Encoding and Deep Learning

T. Xia, L. Zhang, C. Zhou, C. Wang, X. Ni, and Z. Liu

View abstract

01-P2:
Metal Halide Perovskites for Photovoltaic Applications

Arezo. Mahdavi Varposhti, Ivy M. Asuo, Joshua A. Robinson, Nutifafa Y. Doumon

View abstract

02-P2:
Crossover from Ising- to Rashba-Type Superconductivity in Epitaxial Bi2Se3/Monolayer NbSe2 Heterostructures

Hemian Yi, Lun-Hui Hu, Yuanxi Wang, Run Xiao, Jiaqi Cai, Danielle Reifsnyder Hickey, Chengye Dong, Yi-Fan Zhao, Ling-Jie Zhou, Ruoxi Zhang, Anthony R. Richardella, Nasim Alem, Joshua A. Robinson, Moses H. W. Chan, Xiaodong Xu, Nitin Samarth, Chao-Xing Liu,  Cui-Zu Chang

View abstract

03-P2:
Nonlinear Optics Based on Dielectric Metasurfaces

L. Kang and D. H. Werner

View abstract

04-P2:
Fully Stretched to Collapsed: Bottlebrush Polymer Grafted Nanoparticle Materials

J.N. Sevening, M.J.A. Hore, M.T. Swulius, H. Koerner, and R.J. Hickey

View abstract

05-P2:
Non-exhibition of the Bragg Phenomenon from Temporally Periodic Physical Vapor Deposition on Rough Surfaces.

R. A. Fiallo, C. Li, M. W. Horn, and A. Lakhtakia

View abstract

06-P2:
Electrochemical Steady State Isotopic Transient Kinetic Analysis (e-SSITKA): A New Technique for the Investigation of Electrocatalytic Materials
Abigail R. Circelli, Ezra L. Clark

View abstract

07-P2:
PEALD ZnO Thin Film Transistors for Memory, Sensing, and Biomedical Devices

V. Vasquez, Q. Tran, H. Liang, X. Zheng, T. Jeong, T. N. Jackson

View abstract

08-P2:
Selective Area Epitaxial Growth of Magnesium Diboride on SiC using Epitaxial Graphene

P.A. Rondomanski, C. Dong, Q. Li, and J.M. Redwing

View abstract

09-P2:
The High Field MRI Facility at Penn State
T. Neuberger and S. Gullette

View abstract

10-P2:
An Overview of Capabilities and R&D at the Penn State Applied Research Laboratory’s Electronic Materials and Devices Department (EMDD)
Electronic, Piezoelectric and Optical Materials Synthesis, Characterization, Device Fabrication and 3D Printed RF Electronics

David Snyder, Matthew Krohn, Josh Fox, Robert Lavelle, David Rearick, Luke Lyle, Daniel Erdely, Randy Cavalero, Joseph Brown, Scott Pistner, William Everson, Isaiah Adu, Andrew Arbanas, Nicholas Keggan, Brandon Fischer, Bradley Carr and Shawn Watkins

View abstract

11-P2:
Broadband Nonreciprocal Emission and Absorption Using Epsilon-near-zero Metamaterial

Zhenong Zhang and Linxiao Zhu

View abstract

12-P2:
Advancements in Large-Scale, High-Efficiency Flat Optical Devices
S. Chang, L. Zhang, M. Rahman, L. Zhao, A. Islam and X. Ni

View abstract

13-P2:
Synthesis of 2D Materials by Molecular Beam Epitaxy

R. Trice, M. Yu, M. Hilse, S. Law

View abstract

14-P2:
Rational Design of Intermetallic Electrocatalysts for CO Reduction via Electronic Structure Engineering

Majd M.Matalkeh, Ezra L. Clark

View abstract

15-P2:
Smart snapshot full-stokes spectra-polarimetric camera enabled by optical metasurfaces and deep learning

L. Zhang, C. Zhou, Y. Ding, H. J. Ahn, S. Chang, Y. Duan, B. Liu, X. Chen, M. T. Rahman, Z. Liu and X. Ni

View abstract

16-P2:
Prediction of Frontier Orbitals and Excitons in Conjugated Molecules
for Organic Photovoltaics Using Computational Models

Vishal Jindal, Michael J. Janik, Scott T. Milner

View abstract

01-P2:

Probing Memory Formation in a Two-dimensional Amorphous Solid

Z. Wang, N. C. Keim

View abstract

02-P2:
Exploiting 4D-STEM for In-Situ TEM Strain Mapping during Metal Corrosion. 

Yongwen Sun, Ying Han, Dan Zhou, Yang Yang

View abstract

04-P2:

In-Depth Analysis of Common Antioxidant Decomposition: A Comparative Study Using Two-Dimensional and One-Dimensional Gas Chromatography

Rowfi Khan, Barbara Alejandra Perez, Hilal Ezgi Toraman

View abstract

05-P2:

Quantitative 3D Melt Pool Characterization using Focused Ultrasound

L. Katch, N.J. Kizer, L. Mutswatiwa, T. Sun, S.J. Clark, J.S. Lum, D.M. Stobbe, A.P. Argüelles and C.M. Kube

View abstract

06-P2:

Ultrasonic Characterization of Damage in Multilayer Ceramic Capacitors

H.N. Jones, A.P. Argüelles, S. Trolier-McKinstry,

View abstract

07-P2:

Temperature Coefficient Reduction in Layered Dielectric Resonators for MRI Applications

F. Krauch, M. Lanagan, T. Neuberger, Q. Yang, S. Rupprecht, H. Wiesner, X. Zhu and W. Chen
View abstract

08-P2:
Magnetic and Rheological Properties of Shape Memory Epoxy-Iron Oxide Composite Inks

M.H. Zamani and Z. Ounaies

View abstract

09-P2:

Versatile Surface Characterizations of Sum Frequency Generation(SFG) Spectroscopy for Polymers

JC Lee, JS Choi, YW Guo, JH Ryu, SH Kim

View abstract

10-P2:

Is Chemical Pre-Treatment of LDPE Necessary to Accelerate Fungal Degradation of Plastic?

Jacob Simmons, Marina Eshbaugh, Samantha Semler, Gamini Mendis, Luciana Aronne, Josephine Wee

View abstract

11-P2:

A Machine Learning Attack Resilient True Random Number Generator Based on Stochastic Programming of Atomically Thin Transistors

A. Wali, H. Ravichandran & S. Das

View abstract

12-P2:
Multiscale Structural Characterization of Epidermal Cell Wals during Mechanical Stretch

J. Yu, J. T. Del Mundo, E. W. Gomez, E. D. Gomez, and D. J. Cosgrove

View abstract

13-P2:

Use Cross Laminated Timber for Construction of Tornado Resistant Homes

Wei Tong and Ali Memari

View abstract

14-P2:

Dielectric Response of Polymers at High Electric Field

Md Marshfiqur Rahman

View abstract

01-P2:

Optimizing Infrastructure Material Recycling through Adaptive Reuse for Affordable Housing

Daniele Paulino, Heather Ligler, Rebecca Napolitano

View abstract

02-P2:

Unitized Regenerative Fuel Cells with High-Temperature Proton Exchange Membranes

Panagiota Argyro Doika, Christopher G. Arges

View abstract

03-P2:

Understanding rare earth point defects in MoS2

H. Kang and L. Muechler

View abstract

04-P2:

Real-Time Volumetric Micron-Scale Monitoring for Polymer 3D Printing using Ultrasound

Nathan J. Kizer and Christopher M. Kube

View abstract

05-P2:

Towards High-sensitivity Transparent Piezoelectric-Ultrasound Transducers for Biomedical Applications

S. Khandare, A. Amin, S. Kataria, A. Qushaysh, H. Chen, S. Mirg, M. Osman, S.R. Kothapalli

View abstract

06-P2:

Atomic Layer Deposition of Interfacial Coatings for All-Solid-State Lithium Metal Batteries

Silver, A., Wang, D.

View abstract

07-P2:
Sustainable Carbon Materials for Enhanced Composites and Energy Storage

A. Gharpure, and R. Vander Wal

View abstract

08-P2:

Advanced Additive Manufacturing of Metallic Materials

T.A. Palmer

View abstract

09-P2:

Jacklyn Griffis

Jacklyn Griffis

View abstract

10-P2:

Mitigation of Porosity in Laser Powder Bed Fusion Additive Manufacturing

C. M. Cummings, D. J. Corbin, R. Overdorff, E. W. Reutzel, A. R. Nassar

View abstract

11-P2:
Stable All-Solid-State Sodium-Sulfur Batteries Enabled by Sodium-Antimony Alloy Anode and Confined Sulfur CathodeRichard F. Li-Ji Jhang, Daiwei Wang, Alexander Silver, Xiaolin Li, David Reed, Donghai Wang
View abstract

12-P2:

Porous, Biomimetic Hydrogels Demonstrating Structurally-Dependent Mechanical Properties

E.C. Lloyd, R.J. Hickey

View abstract

13-P2:
Topological Classification of Chemical Reactions: A New Tool to Understand and Manipulate Chemical Reactivity

Mirzanejad, A., Daggett, C., Xie, Z. and, L. Muechler

View abstract

14-P2:

Post-Processing Heat Treatment of Additive Manufactured NiTi Alloys with Ti-Rich Composition

F.K. Feni, M. A. Gonzales, and R.F. Hamilton

View abstract

15-P2:

Characterization and Processing Improvements for Fabricating β-Ga2O3 Substrates for Next-Generation Power Electronics

R.M. Lavelle, W.J. Everson, D.J. Erdely, S. Pistner, L.A. Lyle, and D.W. Snyder

View abstract

16-P2:

Quantifying the Affinity Difference between Lithium and Close Identity Ions using ETS-10 Titanosilicate and Supported with Density Functional Theory

W. K. Guo, X. Zhang, M. J. Janik, G. Noh

View abstract

17-P2:

Using Ultrasound to Improve Assessment of the Cold Sintering Process in Support of Eco-Friendly Ceramics Manufacturing

C.S. Wheatley Jr., C.A. Randall, and A.P. Argüelles

View abstract

18-P2:
Pyrolysis of Ethylene Vinyl Alcohol (EvOH)

A. P. Buddha, B. Dr. H.E. Toraman

View abstract

01-P2:

High-Entropy Oxides: Multifunctionality Enabled through Chemical Disorder

B. Yang, S. Almishal, J. Sivak, M.K. Caucci, F. Marques dos Santos Vieira, Y. Tan, S. Ayyagari, T. Karimzadeh Sabet, Y. Son, L. Min, R. Zu, J. Barber, P. Kezer, S. Gelin, P. Lammert, J. Heron, C. Rost, V. Crespi, Z. Mao, S. Trolier-McKinstry, V. Gopalan, L. Chen, N. Alem, S. Sinnott, I. Dabo, J.P. Maria

View abstract

02-P2:

Update on the Nanofabrication facility at the Materials Research Institute

Chad Eichfeld, Guy Lavallee, Bill Drawl, Andrew Fitzgerald, Bangzhi Liu, Bill Mahoney, Kathleen Gehoski, Ted Gehoski, Michael Labella, Wanlin Zhu, Shane Miller, Jaime Reish and Daniel Lopez.

View abstract

03-P2:

Collective Behavior of Free Enzymes and Enzyme-Attached Particles

Tseng Y., Goonetilleke C., Mandal N., and Sen A.

View abstract

04-P2:

Dimensionality Reduction of Nanoparticle Reinforced Ice Microstructures

Barai, Shishir

View abstract

05-P2:

The Effect of the Mobility of Surface-Grafted Polymer on the Interaction between Nanoparticles and Liver Sinusoidal Endothelial Cells

A. Ben Mabrouk, C. George, H. Nakajima, B. Han, U. Hasegawa

View abstract

07-P2:

Are Lab-Made Research Grade Microplastics Analogous to Plastic Consumer Product Degradation Materials?

R.C. Bak, R.P. Bell, R.J. Donahue, M.A. Persch, G.P. Mendis, X. Zhang

View abstract